Industrial cable carrier Shroud to protect the pivot mechanics stainless alloy aluminum hardened ste

2022-06-24 12:41 NXF GROUP

Product Description

TL drag chains are mainly consisting of chain plate (top quality stainless steel with chromium plated), supporting board
(extruded aluminium alloy) and pinshaft (alloy), etc. There is no relative motions between the cables/rubber hoses and the drag chains, giving no deforming or twists. The chormium plated chain board has very nice-looking appearance and has very rational construction and flexible and high strength. It is reliable and easy to operate, install, dismantal or assemble. It is worthwhile mentioning that the anti-wearing performance has been inproved greatly due to wear resistant material and alloy pinshaft are used.
The product is flexible to bending and has low resistance, giving low noises. It can be used for a very long period of time
without any deformation or handing down.

Type	Min. width(mm)	height(mm)	Bending eadius(mm)
TL30	..40-100	25	20
TL45	35..	32	50/75/90/114/145
TL65	50..	49	75/90/115/125/145/185
TL80	55	56	100/115/125/145/185/200/250/300
TL95	60	75	114/145/200/250/300
TL115	70	86	145/200/225/250/300/350
TL125	80	96	200/250/300/350/470/500/575/700/750
TL155	90	120	200/250/300/350/450/500/600
TL180	100	144	250/300/350/450/490/600/650
TL225	160	200	400/450/600/750/800/850/1000
TL250	190	220	400/450/500/600/750/800/1000

H900ebb8c68d74d41b1fa9e29817da526J.webp.jpg H8e364e285b274ef3b0eae8b8f87b62228.webp.jpg HTB1lyHeOXXXXXb7apXXq6xXFXXXi.webp.jpg

Details Images

Temperature	Long term temperature limits are between -20°C and 600°C. (for stainless the limits are -40°C and 600°C)
Travel Distance	The maximum range of travel is determined by the arrangement and the additional weight (line weight). At normal arrangement the maximum travel is double the free carrying length. Support rollers or similar constructive steps can increase this value. Travel distances up to 100 meters are possible.
Travel Speed	The standard and stainless steel designs are limited at 1 m/s.
Acceleration	There are no limits for the accelerations, in general. Limits may occur through the tensile stresses at high line weights.