NXF GROUP
Phone/Whatsapp:+8613917160311
Email: info@nxf-group.com
Email: Andrew@nxf-group.com
Email: Alice@nxf-group.com
English
NXF UNS N04400/Monel400/Ni-Cu-Fe DN15-1200 SCH10-XXS Nickel Alloy 90/45 Degree L/R or S/R Butt Welding N04400 Elbow
QR code
share
Elbow, also known as 90-degree elbow or right-angle elbow, is a pipe fitting used in the piping system to change the direction of the pipeline. It is mainly applied in the field of plumbing installation. This pipe fitting can be classified into three common types according to the angle: 45°, 90°, and 180°. It also includes non-standard angles such as 60° for special engineering requirements. When the bending radius is less than or equal to 1.5 times the pipe diameter, it is defined as an elbow.
The material of the elbow covers cast iron, wrought cast iron, stainless steel, alloy steel, carbon steel, non-ferrous metals, and plastics, and the connection methods include direct welding, flange connection, hot melt connection, electric fusion connection, threaded connection, and socket connection, etc. [1]. According to the production process, it is divided into categories such as welded elbow, stamped elbow.
The material of the elbow covers cast iron, wrought cast iron, stainless steel, alloy steel, carbon steel, non-ferrous metals, and plastics, and the connection methods include direct welding, flange connection, hot melt connection, electric fusion connection, threaded connection, and socket connection, etc. [1]. According to the production process, it is divided into categories such as welded elbow, stamped elbow.
DetailReview(0)
Product Description
Monel 400 Introduction
Monel 400 alloy (UNS N04400/MCu-28-1.5-1.8/Ni68Cu28Fe) is a nickel-based alloy, primarily composed of nickel-copper alloy, with a melting point of 1300-1350°C. It exhibits good corrosion resistance in corrosive media such as seawater, hydrofluoric acid, and sulfuric acid. This alloy demonstrates stable mechanical properties and is suitable for working environments ranging from low to high temperatures. Welding can be performed using TIG, MIG, and manual arc welding, matched with Monel body material or EniCu-7 welding consumables.This alloy is mainly used in the manufacture of heat exchange equipment, chemical pipelines, reaction vessels, and other devices, conforming to standards including ASTM B 164 (bars) and ASTM B 127 (plates). During machining, shrinkage allowance must be allowed to ensure dimensional accuracy. This can be achieved through traditional machining methods; however, high-speed machining requires the use of water coolant.
Elbow Introduction
Elbow, also known as 90-degree elbow or right-angle elbow, is a pipe fitting used in the piping system to change the direction of the pipeline. It is mainly applied in the field of plumbing installation. This pipe fitting can be classified into three common types according to the angle: 45°, 90°, and 180°. It also includes non-standard angles such as 60° for special engineering requirements. When the bending radius is less than or equal to 1.5 times the pipe diameter, it is defined as an elbow.The material of the elbow covers cast iron, wrought cast iron, stainless steel, alloy steel, carbon steel, non-ferrous metals, and plastics, and the connection methods include direct welding, flange connection, hot melt connection, electric fusion connection, threaded connection, and socket connection, etc.The main production processes include hot push forming, stamping forming, and plate welding. Among them, the hot push process has the characteristics of uniform wall thickness and continuous operation, and has become the main production method for carbon steel elbows. The products need to undergo surface shot blasting treatment and anti-corrosion paint coating. This pipe fitting is widely used in engineering fields such as chemical engineering, construction, petroleum, power, shipbuilding, etc. It performs the functions of direction conversion and connection of different pipe diameters in the pipeline system and is also known by industrial names such as butt-weld elbow.
BUTT-WELDING ELBOWS DRAWING
Monel 400 Chemical Composition And Mechanical Properties
Specification
Elbow Produce Processing
1. Raw Material Preparation：Select qualified steel pipes/round bars, inspect chemical composition & mechanical properties.
2. Cutting：Cut raw materials into fixed-length blanks by sawing/cutting machine.
3. Heating：Heat blanks to 900-1100℃ in heating furnace for plastic forming.
4. Forming：- Hot pushing: Push heated blanks via pushing machine to form elbow shape with mold.- Hot forging: Forge blanks into elbow rough shape by forging press.
5. Trimming：Remove flash, burrs and excess material from formed elbows.
6. Heat Treatment：Quench + temper to improve hardness, toughness and corrosion resistance.
7. Machining：Process end faces, inner/outer diameters to meet dimensional accuracy.
8. Surface Treatment：Derust via shot blasting/pickling, then do anti-corrosion coating (painting, galvanizing).
9. Inspection：Check dimensions, appearance, non-destructive testing (UT, RT) and pressure test.
10. Packing & Storage：Pack qualified elbows and store in dry, ventilated warehouse.
Packing & Delivery
Company Profile
New XiFei (SuZhou) Business Co.,Ltd is one of the leading and most respected manufacturers in China. Our products include metals, machinery, containers, construction materials, mechanical products, electrical systems, and medical accessories. Established in 1980, XIFEI has been working diligently ever since to embrace the needs of our global customer base.We work to ensure absolute customer satisfaction. Our team has dedicated itself to perfecting our three core components, "Service, Management and Craftsmanship." Our advantage as follow: 1.We have our own factory, and we can control the cost by producing by ourselves. We have a great advantage in price and can give you the lowest price. 2. We can strictly control the quality. We have production, quality inspection, warehousing and other departments to coordinate and control the quality. 3. Our biggest advantage is 3S service. Small quantity, short time, special materials.
FAQ
1. who are we?
We are based in Jiangsu, China, start from 2021,sell to South Asia(30.00%),Eastern Asia(10.00%),Mid East(10.00%),Eastern Europe(10.00%),South America(10.00%),Domestic Market(5.00%),North America(5.00%),Northern Europe(5.00%),Central America(5.00%),Africa(5.00%),Southeast Asia(5.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Pipe,Flange,Steel plate,Pipe fittings,Alloy products
4. why should you buy from us not from other suppliers?
Our advantage:3S Service (Small Quantity/Short Time/Special Material) We have our own factories, quality can be controlled seriously.We Specialize in manufacturing about 21 years.We have professional testing department and testing equipment.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,DDP,DDU；
Accepted Payment Currency:USD,EUR,CAD,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,PayPal;
Language Spoken:English,Chinese,Spanish,Russian
Phone
+8613917160311
Whatsapp
Whatsapp
+8613917160311
Wechat
Wechat
Inquiry
Email
info@nxf-group.com
Inquiry
Inquiry
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.