NXF UNS S31600 316/0Cr17Ni12Mo2/1.4401 DN15-1200 SCH10-XXS 316 Stainless Steel 90/45 Degree LR or SR Butt Welding Elbow

316 Stainless Steel Introduction：Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). Grade 316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti.The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.316 Stainless Steel Applications：Food preparation equipment particularly in chloride environments.Laboratory benches & equipment.Coastal architectural panelling, railings & trim.Boat fittings.Chemical containers, including for transport.Heat Exchangers.Woven or welded screens for mining, quarrying & water filtration.Threaded fasteners.Springs.Butt Welding Elbow Introduction:Butt Welding Elbows are a common type of pipe fitting used in plumbing installations, connecting pipes at bends to change their direction. This utility model relates to the technical field of plumbing pipes, and particularly to a plumbing pipe bending mechanism. This mechanism can cool down the heated and bent plumbing pipes, accelerating the shaping process, reducing cooling time, improving construction efficiency, and enhancing practicality. It includes a base, multiple support legs, a heating device, and a bending device. The bending device includes an electric push rod, a mounting sleeve, a bending head, two rotating shafts, and two limiting guide wheels. The support legs are mounted at the bottom of the base for support. The heating device is mounted at the top of the base to heat the plumbing pipes. The bending device is mounted at the front top of the base. The system also includes a cooling device at the bottom of the base to cool the bent plumbing pipes, and an adjusting device at the top of the base to adjust the bending position of the plumbing pipes.