This fitting is integrally forged from ZeCor-310M with dense and uniform microstructure. It features outstanding high-temperature resistance, oxidation resistance, corrosion resistance and excellent creep resistance, which can work reliably for a long time under severe service conditions such as high-temperature flue gas, heat treatment furnace pipelines and high-temperature process media.
The inner bore is tapered female pipe thread, normally NPT thread. Sealing is realized by threaded engagement without welding. It is easy to install and disassemble for pipeline expansion and maintenance. It covers pressure classes of 2000LB, 3000LB and 6000LB, sizes ranging from 1/8″ to 4″ . It is widely used in petrochemical, energy, metallurgy, high-temperature instrument sampling lines and high-temperature process piping systems.




1. Raw Material InspectionRaw material is ZeCor-310M bar stock. Verify material certificates, perform spectrum test for chemical composition and mechanical properties. Mark heat numbers for full traceability.
2. CuttingCut billets according to drawing dimensions, remove burrs and scale on cutting surfaces, reserve allowance for forging and machining.
3. Heating and Closed Die ForgingHeat billets to specified forging temperature, forge cap blanks by closed die forging, control process parameters to achieve uniform and dense grain structure
.4. Heat TreatmentSolution treatment is carried out in accordance with dedicated ZeCor-310M procedure to release forging stress and stabilize high-temperature and corrosion resistance.
5. Shot BlastingRemove scale and forging contaminants from blank surface by shot blasting.
6. Precision MachiningCNC turning for inner NPT tapered threads, outer circle, end faces and bottom of cap. Strictly control thread form accuracy, thread length and wall thickness tolerance to guarantee threaded sealing performance.
7. MarkingLaser marking of material, size, pressure class, heat number and standard number.
8. Finished Product InspectionDimensional check, visual inspection, hardness test, PT penetrant testing as required to detect surface defects.
9. Surface PassivationPassivation treatment to improve corrosion resistance.
10. Final Inspection & Document PreparationRecheck all test items, compile MTC, test reports and inspection records.
11. Packing and WarehousingProtective packing, classified storage with full quality documents attached.